SSD and HDD memory

Our invention is important, because it is easy and faster access. It is needed for saving and finding We chose this invention because today we use much computers and laptops and these memory systems enable saving, storing and reading information. Physics is involved to this because there is magnetism, electromagnetism, mechanical reader, data and electrical signals. There are multiple kinds of storage HDD’s and SDD’s. HDD is slower than SSD memory and it won’t work so many years as the SSD does, but SSD's capacity is lower than HDD's. SSD is used be a storage location for example to Windows operating system.

HDD

Hard Disk Drive is working with mechanical parts (disks(HDD) is based on moving discs (platters) which are moving coated with magnetic material. The data is read and saved by mechanical reader "Head". The other side of the actuator (other than the Head's) moves between two strong magnets. The most popular hard disks are usually about 500 GB but generally some lap tops could have only 160-320 GB Hard disks.

Image Added

Picture1. HDD's parts

The data is stored digitally as tiny magnetized bits on the disk. A magnetic orientation in one direction on the disk could represent a a "1" , and an orientation in the opposite direction could represent a "0".

Image RemovedImage Removed

Image Added

Picture2. How data is stored in HDD

SSD

Solid State Drives are electronic working of silicon memory chips and it uses NAND based flash memory. There are no mechanics and any moving parts like spinning platters so they are very fast and shock resistant.

Image Removed

SSD

How is info read from SSD?

Inside the SSD are five main parts. These are controller, NAND flash memory, SATA interface, SSD PCB and card (circuit board). The most of the Solid State Drives' capacity are 30/32, 60/64 or 120/128 GB.

Image Added

Picture3. SSD's parts

NAND Flash Technology of SSD

There are mainly two different NAND Flash types used today, Single-Level Cell (SLC) and Multi-Level Cell (MLC). NAND Flash stores data in a large array of cells. Every cell can store data: 1 bit per cell for SLC NAND and 2 bits for cell for MLC. SLC NAND stores a "0" or "1" in each cell and MLC NAND stores "00", "01", "10" or "11" in each cells. SLC and MLC differences are levels of performance and endurance characteristics at different prices. SLC is higher performing and more expensive than MLC.

Image Added

Picture4. SDD cards

How is info read from SSD?

The information is travelling from the SSD to the computer through a standard SATA connection. Inside the SSD the controller is an embedded processor that bridges flash memory components to the host (such as a computer).

The controller executes codes provided by the SSD's firmware (a mini operating system) to full-fill the data requests from the host. The information is stored and red read with zeros and ones. The memory cells store voltage and (in SLC cells) can be either an on (1) or off (0), which allows them to store data in binary form.

Image Removed SATA = is a computer bus interface which connects host bus adapters to mass storage devices such as hard disk drives and optical drives.