Note: We still have to complete the posed questions, so this is only the 'introduction'. Hence, no references are given.
Time: A history of clocks
History of time
In today's world, the most widely used numeral system is decimal (base 10), a system that probably originated because it made it easy for humans to count using their fingers. The civilizations that first divided the day into smaller parts, however, used different numeral systems, specifically duodecimal (base 12) and sexagesimal (base 60).
...
Thanks to the ancient civilizations that defined and preserved the divisions of time, modern society still conceives of a day of 24 hours, an hour of 60 minutes and a minute of 60 seconds. Advances in the science of timekeeping, however, have changed how these units are defined. Seconds were once derived by dividing astronomical events into smaller parts, with the International System of Units (SI) at one time defining the second as a fraction of the mean solar day and later relating it to the tropical year. This changed in 1967, when the second was redefined as the duration of 9,192,631,770 energy transitions of the cesium atom. This recharacterization ushered in the era of atomic timekeeping and Coordinated Universal Time (UTC).
The use of time and clocks
Time. A potentially endless dimension known by all, yet understood by none. It is described as the fourth dimension, a measure of ordering events from the past, through the present and into the future.
...
Now, let us do something that is seemingly impossible in our linear vision of time: fast forwarding. Luckily, this is only a thought experiment so we can go from the ancient times of gnomons, sundials and hour glasses to the present time. We find ourselves in the 21st century, a time in which the world is seemingly dominated by our obsession of time. We live in a time where we wish to always know what time it is, in a time where time equals money and power, and in a time in which we simply wish we had more time. But, what is the use of time and clocks with it?
Let us consider Consider time as a linear event. This implies that, as mentioned in the beginning of this section, that time is a measure of ordering events from the past, through the present and into the future, and once the moment passes it becomes part of the past. Time in such a fashion is used nowadays for multiple purposes. First and foremost, to know what time of day it is. This is also the use of clocks to a large extent. Knowing the time enables, for example, multiple people to arrange a meeting at a certain time at which every participant will be present. To get to this meeting, one might have to catch a train that leaves at a certain point. To get to the train before it leaves, the potential participant will have to leave his house before a specific time.
...
When you’re traveling to a location, say for example the bus stop near your house, you usually don’t talk about a certain amount of meters that you have to travel. Instead, the bus stop is located at roughly a five minute walk. Or, when taking an airplane from Helsinki to New York, it’s an eight hour trip. Hardly anyone thinks about the 6620 kilometers that are travelled during this trip.
Why we think in this way, might be because the time it takes to travel a certain distance is relative to the speed at which it is travelled. If we were to travel from Helsinki to New York at the same speed at which we went to the bus stop, it would take roughly 55 days at an average of 5 km/h - not including the necessary stops and rests.
It is to no surprise then that time is one of the seven fundamental physical quantities in the International System of Units and in the International System of Quantities. Time is used to define, amongst things, velocity and acceleration. The flight from Helsinki to New York will average out at about 830 kilometers per hour. In order to measure this, or any, velocity, being able to measure the amount of time it took to travel a certain distance is crucial.
Types of clocks
Time can be measured in many ways and there are many types of clocks to measure time. The most of the clocks indicate the time of the day. Measuring cycle is typically 12 or 24 hours, which the clock divide smaller parts.
Clocks can be classified by the type of time display, as well as by the method of timekeeping. Typical classifications are by mechanism, by function or by style.
Principles of clock types
Water Clock. A water clock is any timepiece in which time is measured by the regulated flow of liquid into or out from a vessel where the amount is then measured.
Candle clock. A candle clock is a thin candle with consistently spaced markings, that when burned, indicate the passage of periods of time.
Incense clock. The clocks' bodies are effectively specialized censers that hold incense sticks or powdered incense that have been manufactured and calibrated to a known rate of combustion, used to measure minutes, hours, or days.
Sundial. A sundial is a device that tells the time of day by the position of the Sun. The sun casts a shadow from its style onto a surface marked with lines indicating the hours of the day. The style is the time-telling edge of the gnomon.
Astronomical clock. An astronomical clock is a clock with special mechanisms and dials to display astronomical information, such as the relative positions of the sun, moon, zodiacal constellations, and sometimes major planets.
Hourglass. An hourglass measures the passage of a few minutes or an hour of time. It has two connected vertical glass bulbs allowing a regulated trickle of material from the top to the bottom. Once the top bulb is empty, it can be inverted to begin timing again.
Mechanical clock (e.g. pendulum clock, pocket watch, equation clock, Marine chronometer, wristwatch). A mechanical clock uses a mechanical mechanism to measure the passage of time, as opposed to modern watches which function electronically. It is driven by a spring (called a mainspring) which must be wound periodically. Its force is transmitted through a series of gears to power the balance wheel, a weighted wheel which oscillates back and forth at a constant rate. A device called an escapement releases the watch's wheels to move forward a small amount with each swing of the balance wheel, moving the watch's hands forward at a constant rate.
Electric clock. An electric clock is a clock that is powered by electricity, as opposed to a mechanical clock which is powered by a hanging weight or a mainspring. The term is often applied to the electrically powered mechanical clocks that were used before quartz clocks replaced them in the 1980s.
Quartz clock. A quartz clock is a clock that uses an electronic oscillator that is regulated by a quartz crystal to keep time.
Atomic clock. An atomic clock is a clock device that uses an electronic transition frequency in the microwave, optical, or ultraviolet region of the electromagnetic spectrum of atoms as a frequency standard for its timekeeping element.
How clocks work
A clock needs a power source, that provides power to keep the clock going. The timekeeping element in every modern clock is a harmonic oscillator, a physical object (resonator) that vibrates or oscillates repetitively at a precisely constant frequency. A clock has usually some kind of controller, which has the dual function of keeping the oscillator running by giving it 'pushes' to replace the energy lost to friction, and converting its vibrations into a series of pulses that serve to measure the time. Also there are counter chain, which counts the pulses and adds them up to get traditional time units of seconds, minutes, hours, etc. It usually has a provision for setting the clock by manually entering the correct time into the counter. Lastly there has to be an indicator, that displays the count of seconds, minutes, hours, etc. in a human readable form.
(http://en.wikipedia.org/wiki/Clock)
Accuracy
Why are some clocks more accurate than others?
An accurate clock is a clock that is in synchrony with the standard clock. When the time measurements of the clock agree with the measurements made using the standard clock, we say the clock is accurate or properly calibrated or synchronized with the standard clock or simply correct. A perfectly accurate clock shows that it is time t just when the standard clock shows that it is time t, for all t. Accuracy is different from precision. If a clock read exactly three minutes slow compared to the standard clock, then it's very precise, but it's inaccurate by three minutes.
One issue is whether the standard clock itself is accurate. Realists will say that the standard clock is our best guess as to what time it really is, and we can make incorrect choices for our standard clock. Anti-realists will say that the standard clock cannot, by definition, be inaccurate, so any choice of a standard clock will yield a standard clock that is accurate.
A clock is accurate, if firstly it's action is precise, and secondly it's action is more close in sycronity with the standard clock. The more constantly the clock ticks, the more precise it is, and the more close in syncronity with the standard clock the clock is, the more accurate it is.
How does energy interact with matter in clocks?
How does light (electromagnetic radiation) interact with matter in clocks?
Without researching, we can first of all say that one type of interaction that EM waves have with clocks is reflection. As with any type of matter, light must reflect off of it to make it visible. Depending on the wavelength of the radiation, different effects can occur. These effects also depend on the type of clock.
For mechanical clocks, the following would apply. If one were to put a clock in a microwave, the molecules of which the clock is made will start to oscillate with the waves. This increase in motion of the molecules will manifest in an increased temperature of the clock (or any type of matter). If the wavelength is lowered to the wavelengths of visible light, the waves will be reflected and the clock is visible. Lower the wavelength even more to, for example, x-ray wavelengths, and one could somewhat see through the clock, depending on the matter-composition.
An atomic clock is a different situation altogether. This type of clock uses the molecular energy transition frequency of a specific wavelength to keep track of time. If this process would be subject to an external source of radiation, the process could be disrupted, resulting in an incorrect display of time.
What does the research say?
For most physical type of clocks, the same principles apply that also apply to most of the existing matter. Because matter largely consists of nothing, any given photon has a finite probability completely passing through an atom. This probability depends on numerous factors, such as the photon’s energy and the medium’s composition and thickness. If an atom has a higher atomic value, implying a larger nucleus, the photon has a larger probability of encountering this atomic particle. When this happens, the photon transfers energy to the particle. This energy may be reflected back, scattered in a different direction, or transmitted forward into the material.
Reflection and transmission of electromagnetic radiation occur because the waves transfer energy to the electrons of the material, causing them to vibrate. If the material is transparent, such as glass, then the vibrations are passed on to neighbouring atoms through the bulk of the material and reemitted at the other side of the material. If the material is not transparent, the electrons vibrate for a short period of time and then re emit the energy as a reflected wave. (3.1)
X-rays and ɣ-rays also transfer their energy to matter, however due to their higher energy levels they do more than merely making the electrons vibrate. Instead, they eject or excite electrons. This increase in electron energy is then transferred to nearby electrons. With each interaction, the direction of energy may be changed. If the radiation has had enough energy upon entry of the material, it may eventually make it through the material, even if it wasn’t transparent. This is the starting principle of how x-ray photographs are made.
Reference list
3.1
Interaction of Electromagnetic Radiation and Matter. 2014. Interaction of Electromagnetic Radiation and Matter. [ONLINE] Available at:https://www.nde-ed.org/EducationResources/CommunityCollege/RadiationSafety/theory/interaction.htm. [Accessed 03 December 2014]