Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

 Optical discs used originally for storing and playback sound tracks but is developed later to store data, rewrite-ability and much more features, and is the basic form of latter development in optical format  Image Modified

Physical detail:
A standard CD is 1.2mm thick, 15-20grams in weight, diameter of 120mm. It consists of 4 layers as stated from the figure: a polycarbonate layer that contain data, aluminum or gold layer for reflective purpose, film/lacquer layer to provide protection to previous important parts and the most outer layer used for label printing

The elongated bumps that make up the track are each 0.5 µm wide, a minimum of 0.83 µm long and 125 nm high. They look something like this: Image Modified

You will often read about "pits" on a CD instead of bumps. They appear as pits on the aluminum side, but on the side the laser reads from, they are bumps.

...

A CD is read by focusing a 780 nm wavelength- infrared level, semiconductor laser through the bottom of the polycarbonate layer. The change in height between pits and lands results in a difference in the way the light is reflected. By measuring the intensity change with a photo-diode, the data can be read from the disc. Image Removed  Image Added
Image Added

Each string of 1s and 0s corresponds to an electrical signal (a voltage). The DAC (digital-to-analog converter) turns the numbers into voltages. The voltages change 44,000 times per second! The amplifier sends the voltages to the speakers where they turn into a series of sounds.

DVD - Phat

Bluray - Thai