...
A single axis sensor would only measure an angle in one direction. To measure an angle in all directions, for example, to a compass heading, a dual axis sensor or two singles axis sensors mounted 90 degrees to each other would be required. This would allow the measurement to be made in any direction by combining the readings of both axes as seen in figure 1.
Figure 1: An electrolytic tilt sensor
Structure and operation
The tilt sensor functions like a liquid potentiometer. The electrically conductive fluid creates a variable resistance between the electrodes. When the sensor is in the null or balanced position, the resistances between the centre electrode to each outside electrode are equal. Tilting the sensor from its balanced position changes the two resistances producing an electrical output proportional to the tilted angle. The major electrolytic salts are chosen from metal cations, such as sodium, potassium, lithium, calcium and cesium, of which the ionic species offer good conductivity at every level of dilution. The electrolytic salts are also selected from anions, such as nitrate, carbonate, acetate and hydroxide, which resist chemically combining with the metallic elements of the metal electrode materials. Solvents may include methanol, ethanol, butanol, propanol and isopropanol that provide the ability to control the viscosity of the electrolyte, related directly to the response time of tilt sensor[1].
...
Figure 2: Structure of Electrolytic Tilt Sensor
Excitation
The electrolytic tilt sensor(level) can be energized in a number of ways depending on the applications and performance required. Typically, there are two ways to energize and read the level.
...
Temperature sensitivity of the sensor can be divided into two areas. The first, steady state changes, is simplest to consider. As temperature goes up, scale factor goes down, linearly. All sensor scale factors change by 0.067% per degree F as a nominal number.The second, transient temperature conditions cause the greatest difficulty when they create left to right gradients. These are significantly attenuated when a potting compound having low thermal conductivity is used to completely encapsulate the sensor.
Figure: Block Diagram for excitation
Applications
The applications for electrolytic tilt sensors are extremely diverse, touching most industries in some way. Some of the areas where electrolytic tilt sensors are used are:
...
Avionics manufacturers use high precision tilt sensors in gyroscopes. The automotive industry uses tilt sensors in wheel alignment machines for measuring caster and camber angle and for security and RV leveling systems. In construction industry the application of tilt sensors range from safety systems in cranes, manlifts man lifts to providing reference data of various types of lasers.The electrolytic tilt sensors are also used to satellite antenna positionpositioning, geo-technical monitoring and tilt compensation in electronic compasses.[4]
...