Intelligent Machine Control projektissa tehtiin vuosina 2002...2008 yhteensä 25 lopputyötä, yksi diplomityö ja yksi väitöskirja. Projektiin osallistui 15 aktiivista assistenttia ja opettajia.
Loppuraportti
Artikkelit kansainvälisissä aikakauslehdissä, joissa refereekäytäntö
Deraemaeker, A., Reynders, E., De Roeck, G., Kullaa, J. 2007. Vibration-based structural health monitoring using output-only measurements under changing environment. Mechanical Systems and Signal Processing, Vol. 22 (2008), 34-56.
Artikkelit kansainvälisissä tieteellisissä kokoomateoksissa sekä kansainvälisissä tieteellisissä konferenssijulkaisuissa, joissa refereekäytäntö
Kullaa, J. 2003. Is temperature measurement essential in structural health monitoring? Proceedings of the 4thInternational Workshop on Structural Health Monitoring. Fu-Kuo Chang (ed.). Stanford, CA. September 15 - 17, 2003. Stanford University. DEStech Publications. 717 - 724.
Kullaa, J. 2004. Active control of a mast structure using support excitation. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004). P. Neittaanmäki, T. Rossi, K. Majava, and O. Pironneau (eds.), K. P. Estola and G. Di Bona (assoc. eds.). Jyväskylä, 24-28 July 2004.
Kullaa, J. 2004. Structural health monitoring under variable environmental or operational conditions. Proceedings of the second European Workshop on Structural Health Monitoring 2004. C. Boller, W.J. Staszewski (eds.). Munich, Germany, July 7-9, 2004. DEStech Publications. 1262-1269.
Kullaa, J. 2004. Latent variable models to eliminate the environmental effects in structural health monitoring. Proceedings of the Third European Conference on Structural Control. Volume II. R. Flesch, H. Irschik and M. Krommer (eds.). Vienna, Austria, July 12-15, 2004. Vienna University of Technology, S5-55 - S5-58.
Kullaa, J. 2004. Structural health monitoring of a crane in variable configurations. Proceedings of ISMA2004, International Conference on Noise and Vibration Engineering. Sas, P. and De Munck, M. (eds.). Leuven, Belgium, September 20-22, 2004. 457-469.
Kullaa, J. 2005. Damage detection under a varying environment using the missing data concept. Proceedings of the 5thInternational Workshop on Structural Health Monitoring. Fu-Kuo Chang (ed.). Stanford, CA. September 12-14, 2005. Stanford University. DEStech Publications. 565-573.
Kullaa, J. 2005. Environmental and operational effects in structural health monitoring. Proceedings of the 11th International Conference on Vibration Engineering. L. Bereteu et al. (eds.). Timisoara, Romania, September 27-30, 2005. 275-280.
Deraemaeker, A., Preumont, A., and Kullaa, J. 2006. Modeling and removal of environmental effects for vibration based SHM using spatial filtering and factor analysis. Proceedings of IMAC-XXIV: A Conference on Structural Dynamics, St. Louis, Missouri, USA, January 30 - February 2, 2006. Society for Experimental Mechanics.
Kullaa, J. 2006. Removing non-linear environmental influences from structural features. Proceedings of the third European Workshop on Structural Health Monitoring 2006. A. Güemes (ed.). Granada, Spain, July 5-7, 2006. DEStech Publications. 635-642.
Deraemaeker, A., Reynders, E., De Roeck, G., Kullaa, J. 2006. Vibration based SHM: comparison of the performance of modal features vs features extracted from spatial filters under changing environmental conditions. Proceedings of ISMA2006, International Conference on Noise and Vibration Engineering. Sas, P. and De Munck, M. (eds.). Leuven, Belgium, September 18-20, 2006. 849-863.
Kullaa, J. 2006. Sensor fault identification and correction in structural health monitoring. Proceedings of ISMA2006, International Conference on Noise and Vibration Engineering. Sas, P. and De Munck, M. (eds.). Leuven, Belgium, September 18-20, 2006. 873-884.
Savolainen, J., Kullaa, J., Wiik, M., Söderholm, J. 2006. Object oriented and open development environment for the controller of hydraulic booms. The 11thinternational CAN Conference (iCC), Stockholm, Sweden, September 26-28, 2006.
Kullaa, J. and Heine, T. Feature comparison in structural health monitoring of a vehicle crane. Proceedings of the International Conference on Engineering Dynamics (ICED 2007). Fontul, M., Maia, N.M.M., Ribeiro, A.M.R., Silva, J.M.M. (eds.) Carvoeiro, Algarve, Portugal, April 16-18, 2007.
Kullaa, J., Heine, T., Olsamo, T. 2007. Structural health monitoring of a vehicle crane. The Tenth Scandinavian International Conference on Fluid Power (SICFP07), Tampere, Finland, May 21-23, 2007. Vilenius, J. and Koskinen, K.T, (eds.). Tampere University of Technology. Volume 3, 327-341.
Paavilainen, H., Savolainen, J., Kullaa, J. 2007. Vibration damping of the crane. The Tenth Scandinavian International Conference on Fluid Power (SICFP07), Tampere, Finland, May 21-23, 2007. Vilenius, J. and Koskinen, K.T, (eds.). Tampere University of Technology. Volume 3, 133-149.
Deraemaeker, A., De Roeck, G., Reynders, E., Worden, K., Manson, G., Kullaa. J., Lämsä, V., Ostachowicz, W. 2007. Smart Sensing for Structural Health Monitoring (S3HM). The World Forum on Smart Materials and Smart Structures Technology, SMSST '07. Chongqing & Nanjing, China, May 22-27, 2007.
Lämsä, V. and Kullaa, J. 2007. Dynamical extension of nonlinear factor analysis in structural health monitoring to remove environmental effects. III ECCOMAS Thematic Conference on Smart Structures and Materials. W. Ostachowicz, J. Holnicki-Szulc, C. Mota Soares (Eds.). Gdansk, Poland, July 9-11, 2007. IFFM Publishers.
Kullaa, J. 2007. Sensor fault identification and correction in vibration-based multichannel structural health monitoring. Proceedings of the 6th International Workshop on Structural Health Monitoring. Fu-Kuo Chang (ed.). Stanford, CA. September 11-13, 2007. Stanford University. DEStech Publications.606-613.
Lämsä, V. and Kullaa, J. 2007. Nonlinear factor analysis in structural health monitoring to remove environmental effects. Proceedings of the 6thInternational Workshop on Structural Health Monitoring. Fu-Kuo Chang (ed.). Stanford, CA. September 11-13, 2007. Stanford University. DEStech Publications. 1092-1099.
Artikkelit kotimaisissa aikakauslehdissä, joissa refereekäytäntö
Artikkelit kotimaisissa tieteellisissä kokoomateoksissa sekä kotimaisissa tieteellisissä konferenssijulkaisuissa, joissa refereekäytäntö
Tieteelliset monografiat
Timo Heine. 2004. Mittausohjelman kehittely ja ajoneuvonosturin värähtelymittaukset. Insinöörityö, Helsingin ammattikorkeakoulu.
Saiprasad Jnanam. 2004. Finite Element Analysis and Simulation of Vibrations of a Mast of a Lift Truck. MSc. Thesis, Högskolan Dalarna.
Tero Olsamo. 2005. Värähtelymittauksiin perustuva ajoneuvonosturin kunnonvalvonta. Insinöörityö, Helsingin ammattikorkeakoulu
Tapio Töysä, 2007.
Muut tieteelliset julkaisut, kuten artikkelit tieteellisissä lehdissä ja konferenssijulkaisuissa, joissa ei ole refereekäytäntöä sekä julkaisut yliopisto- ja laitossarjoissa
Savolainen, J.,Kullaa, J. & Paavilainen H. 2005. Älykäs kone varoo särkymästä. Metallitekniikka 9/2005, 43-45.
Kullaa, J.,Savolainen, J., & Paavilainen H. 2008. Hydraulisten koneiden koordinaattiajo. Automaatioväylä 3/2008.
Muut julkaisut
Kullaa, J. 2005. Työkoneen rakenteiden kunnonvalvonta. Koneenrakennuksen teknologiaohjelma MASINA tulosseminaari. Hämeen AMK, Hämeenlinna, 19.10.2005. Tekes.
Kullaa, J. 2008.Värähtelymittauksiin perustuva työkoneen rakenteen kunnonvalvonta. Koneenrakennuksen teknologiaohjelma MASINA päätösseminaari. Tampere 13.-14.05.2008. Tekes.