Position sensors

Capacitive sensors

Capacitive sensors technology is based on capacitive coupling which detects human body capacitance. The capacitive touch screen consists of an electric insulator such as glass, which is plated with an electrically conductive material. When human touches the glass, it creates a change in the electric field that can be detected as capacitance change by the sensor. In Figure 1 we can see a typical capacitive sensor.

Figure 1

A good example about capacitive sensors is the touch screen of iPhone. It has a circuitry which can detect changes at each point along the grid. Every point has its own unique signal when touched and relays that to the iPhone’s processor. This way of detecting human touch gives iPhone the ability to determine the location and movement of simultaneous touches in multiple locations on the phone’s touch screen.

 Because of iPhone’s reliance of this capacitive material, iPhone’s touch screen doesn’t detect with stylus or non-conductive gloves. In Figure 2 we can see inside iPhone’s touch screen.

 
Figure 2

How does capacitive sensor the detect touch?

Figure 3

Capacitive sensor coverts measured capacitance into a digital value called Raw Counts. With Raw Counts we can detect is the finger on or near the sensor since the sensor can detect change of capacitance even if you are not touching the screen. Figure 3 is a block diagram which shows capacitive touch sensing pre-processing circuit.