You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

Light sensors creates an output signal indication the intensity of light by measuring the radiant energy that exists in a very narrow range of frequencies  called light. It converts the light energy into an electrical signal output. They are also known as photoelectric devices or photo sensors as photons are converted to electrons.

Light sensors can be divided into two categories based on output.one sensor which converts light energy to electrical energy and those which change their electrical properties in some way such as photo-resistors or conductors. According to the output the sensors can be subdivided into following devices.

  • Photo-emissive Cells

    The sensors which release free electrons from a light sensitive material such as Caesium when introduction but the photon of sufficient energy. Higher the frequency higher will be the energy that photon possess.

 

  • Photo-conductive Cells

   These sensors change their electrical resistance when the light is introduced. Photoconductivity results from light hitting as semiconductor material which controls the current flow through it. The most common photoconductive materials Cadmium Sulphide used in LDR photocells.

 

  • Photo-voltaic Cells

When the radiant light energy is received this device generates an emf and is similar in effect to photo conductivity. Light energy fall on to two semiconductor material linked together creating a voltage of 0.5V. Selenium is commonly used photovoltaic material in solar cells.

 

  • Photo-junction Devices

These devices use light to control the flow of electrons and holes across their PN-junction.  These devices are mainly designed for detector application and light penetration with their spectral response tuned to the wavelength of incident light.

 

Photoconductive Cell

Photoconductive light sensor doesn’t produce electricity but it changes its physical properties when introduced to the light. Photo resistor is the common devices used which changes its electrical resistance in response to change in light intensity.

 

References

  1. 1.      Types of light sensors and introduction.

URL: http://www.electronics-tutorials.ws [Online]. Accessed in 20.3.2014

 

  1.  General Idea about light sensors.

URL: http://www.skyeinstruments.com [Online]. Accessed in 20.3.2014

 

  1. Introduction and list of sensors.

URL: http://en.wikipedia.org [Online]. Accessed in 20.3.2014

  • No labels
You must log in to comment.